New minor release of RP4VMs 5.1, this release contains the following fixes
|Issue number||Product feature||Problem summary||Found in version||Fixed in version||KBA|
|144676||RP4VM||When trying to replicate a virtual machine to an existing virtual machine, getting an error message:
Failed to find suitable target VMs with identical
|145005||RP4VM||When guestNicInfo network name is unset, and the Eth network is DVSwitch port, the DGUI will get 2 different names for the same
VLAN, therefore DGUI will fail to install.
|145174,145602||RP4VM||Network Disconnections||5.1||5.1 P1||504101|
|145535||RP4VM||On VDS network, after upgrade to 5.1, network could be disconnected.||5.1||5.1 P1||504096|
|145547||RP4VM||After upgrading to 5.1, the following event is issued in the Virtual Center on RecoverPoint for VMs shadow VM that have EFI firmware configured:
This virtual machine has insufficient memory to
boot with EFI firmware, which requires a minimum of
96 MB. Please increase the virtual machine’s memory
and try again.
The virtual machine stayed powered off even though the Power on task succeeded.
|145562||RP4VM||After upgrading to 5.1, the following event was issued in the Virtual Center on RecoverPoint for VMs shadow VM.
No operating system was found. If you have an
operating system installation disc, you can insert
the disc into the system’s CD-ROM drive and restart
the virtual machine.
The virtual machine continually restarted in order to find the OS, causing CPU spikes on the ESX.
|145574||RP4VM||During migration to 5.1, the shadow networks were replaced with replica networks.||5.1||5.1 P1||WIP|
|145623||RP4VM||When attempting to recover the production VM after it was deleted (missing from the Vcenter inventory\deleted from datastore), RecoverPoint fails to recreate the production VM to synchronize the changes.||5.1||5.1 P1||504106|
|145691||RP4VM||During failover process, user prompts appeared on web client stating that:
Error: The imported network configuration cannot be
applied. Dismiss this message if you want the startup
sequence to continue. If you do not want the
start-up sequence to continue, click the Close
button to disable image access.
|RP4VM||Floppy and boot order issues. Virtual machine repetitively restarted, enable image access failed to load replica VM.||5.1||5.1 P1||No KBA|
|145805||RP4VM||Reboot regulation due to many replication crashes with journal compression enabled when using snapshot consolidation.||5.1||5.1 P1||503581|
as always, the new release can be downloaded from below (click the screenshot)
The link to the RecoverPoint for VMS 22.214.171.124 release notes is: Release Notes
Let the time for the content to be refreshed.